Select any two CPUs for comparison
VS

Gaming Performance Comparison

Recommended System Requirements
Game Celeron M 410 1.46GHz Celeron M ULV 423 1.06GHz
Cyberpunk 2077 2401% 3350%
Assassins Creed: Valhalla 3268% 4545%
Call of Duty: Black Ops Cold War 2324% 3243%
FIFA 21 2239% 3127%
Microsoft Flight Simulator 2733% 3808%
Watch Dogs Legion 3268% 4545%
World of Warcraft: Shadowlands 3789% 5264%
Horizon: Zero Dawn 2733% 3808%
Grand Theft Auto VI 4011% 5570%
Genshin Impact 1794% 2512%

In terms of overall gaming performance, the Intel Celeron M 410 1.46GHz is marginally better than the Intel Celeron M ULV 423 1.06GHz when it comes to running the latest games. This also means it will be less likely to bottleneck more powerful GPUs, allowing them to achieve more of their gaming performance potential.

The Celeron M 410 was released less than a year after the Celeron M ULV, and so they are likely to have similar levels of support, and similarly optimized performance when running the latest games.

Both CPUs exhibit very poor performance, so rather than upgrading from one to the other you should consider looking at more powerful CPUs. Neither of these will be able to run the latest games in any playable way.

The Celeron M 410 and the Celeron M ULV both have 1 cores, and so are quite likely to struggle with the latest games, or at least bottleneck high-end graphics cards when running them. With a decent accompanying GPU, the Celeron M 410 and the Celeron M ULV may still be able to run slightly older games fairly effectively.

More important for gaming than the number of cores and threads is the clock rate. Problematically, unless the two CPUs are from the same family, this can only serve as a general guide and nothing like an exact comparison, because the clock cycles per instruction (CPI) will vary so much.

The Celeron M 410 and Celeron M ULV are not from the same family of CPUs, so their clock speeds are by no means directly comparable. Bear in mind, then, that while the Celeron M 410 has a 0.4 GHz faster frequency, this is not always an indicator that it will be superior in performance, despite frequency being crucial when trying to avoid GPU bottlenecking. In this case, however, the difference is enough that it possibly indicates the superiority of the .

Aside from the clock rate, the next-most important CPU features for PC game performance are L2 and L3 cache size. Faster than RAM, the more cache available, the more data that can be stored for lightning-fast retrieval. L1 Cache is not usually an issue anymore for gaming, with most high-end CPUs eking out about the same L1 performance, and L2 is more important than L3 - but L3 is still important if you want to reach the highest levels of performance. Bear in mind that although it is better to have a larger cache, the larger it is, the higher the latency, so a balance has to be struck.

The Celeron M 410 has a 1023 KB bigger L2 cache than the Celeron M ULV, but neither of the CPUs have L3 caches, so the Celeron M 410 wins out in this area with its larger L2 cache.

The System Bus Speed is important for providing higher bandwidth, and with higher bandwidth the system has the capacity to move more data over a certain time period than it would with lower bandwidth.

The Celeron M 410 and the Celeron M ULV both have System Bus Speeds of 533 MHz, and so have the same limits when it comes to the size of the data being processed at once.

The maximum Thermal Design Power is the power in Watts that the CPU will consume in the worst case scenario. The lithography is the semiconductor manufacturing technology being used to create the CPU - the smaller this is, the more transistors that can be fit into the CPU, and the closer the connections. For both the lithography and the TDP, it is the lower the better, because a lower number means a lower amount of power is necessary to run the CPU, and consequently a lower amount of heat is produced.

The Celeron M 410 has a 28 Watt lower Maximum TDP than the Celeron M ULV (though they were created with the same size 65 nm manufacturing technology). What this means is the Celeron M 410 will consume significantly less power and consequently produce less heat, enabling more prolonged computational tasks with fewer adverse effects. This will lower your yearly electricity bill significantly, as well as prevent you from having to invest in extra cooling mechanisms (unless you overclock).

CPU Core Details

CPU CodenameYonah-
MoBo SocketSocket MSocket 479
Notebook CPUyesyes
Release Date01 Oct 200601 Jul 2006
CPU LinkGD LinkGD Link
Approved

CPU Technical Specifications

CPU Cores1vs1
Clock Speed1.46 GHzvs1.06 GHz
Turbo Frequency-vs-
System Bus 533 MHzvs533 MHz
Max TDP27 Wvs55 W
Lithography65 nmvs65 nm
Bit Width32 Bitvs32 Bit
Voltage Range1.0V-1.3V KBvs0.85V-1.10V KB
Virtualization Technologynovsno
Comparison

CPU Cache and Memory

L1 Cache Size64 KBvs-
L2 Cache Size1024 KBvs1 KB
L2 Cache Speed-vs-
L3 Cache Size-vs-
ECC Memory Supportnovsno
Comparison

CPU Graphics

Graphics
Base GPU Frequency-vs-
Max GPU Frequency-vs-
DirectX-vs-
Displays Supported-vs-
Comparison

CPU Package and Version Specifications

Package Size35mm x 35mmvs35mm x 35mm
Revision-vs-
PCIe Revision-vs-
PCIe Configurations-vs-

Gaming Performance Value

Performance Value

CPU Mini Review

Mini ReviewThe Celeron is a family of microprocessors from Intel targeted at the low-end consumer market. CPUs in the Celeron brand have used designs from sixth- to eighth-generation CPU microarchitectures.Merom is the code name for various Intel processors that are sold as Core 2 Duo, Core 2 Solo, Pentium Dual-Core and Celeron. It was the first mobile processor to be based on the Core microarchitecture, replacing the Enhanced Pentium M based Yonah processor. Merom has product code 80537, which is shared with Merom-2M and Merom-L that are very similar but have a smaller L2 cache. Merom-L has only one processor core and a different CPUID model. The desktop version of Merom is Conroe and the dual-socket server version is Woodcrest. Merom has subsequently been replaced by Penryn.